InstructorSIATBD
TypeOnsite Course
DateDec 26, 2018
Time12 DAYS
Place47/C, Green Road, Tejgaon, Dhaka-1215
Seat1/15
Certificate% of quiz marks
Price4,000 ৳
Buy NowBook Now

Specification SERVO MOTOR and SERVO DRIVE CONTROLLING COURSE:

A servo drive receives a command signal from a control system, amplifies the signal, and transmits electric current to a servo motor in order to produce motion proportional to the command signal. Typically, the command signal represents a desired velocity, but can also represent a desired torque or position. A sensor attached to the servo motor reports the motor’s actual status back to the servo drive. The servo drive then compares the actual motor status with the commanded motor status. It then alters the voltage, frequency or pulse width to the motor so as to correct for any deviation from the commanded status.

In a properly configured control system, the servo motor rotates at a velocity that very closely approximates the velocity signal being received by the servo drive from the control system. Several parameters, such as stiffness (also known as proportional gain), damping (also known as derivative gain), and feedback gain, can be adjusted to achieve this desired performance. The process of adjusting these parameters is called performance tuning.

Although many servo motors require a drive specific to that particular motor brand or model, many drives are now available that are compatible with a wide variety of motors.

Use in industry

Servo systems can be used in CNC machining, factory automation, and robotics, among other uses. Their main advantage over traditional DC or AC motors is the addition of motor feedback. This feedback can be used to detect unwanted motion, or to ensure the accuracy of the commanded motion. The feedback is generally provided by an encoder of some sort. Servos, in constant speed changing use, have a better life cycle than typical AC wound motors. Servo motors can also act as a brake by shunting off generated electricity from the motor itself.

COURSE DURATION OF SERVO MOTOR AND SERVO DRIVE:

NO of Class

  12

Duration per class

2:30 hours

Per Day Class

1

Course fee

4,000

 

COURSE OUTLINE FOR SERVO MOTOR AND SERVO DRIVE:

Number of class

Topic

                                      Class

01

Servo Drive

            Introduction of Servo Drive and Motor

02

Servo Drive

 Programming with practical of Servo Drive

03

Servo Drive

Parameter Setting of Servo Drive

04

Servo Drive

 Troubleshooting of Servo Drive

05

Stepper Motor & Drive

  Introduction of Stepper Drive and Motor

06

Stepper Motor & Drive

 Programming with practical of Servo Stepper Motor and Drive

07

PLC

   Programming with practical

08

         VFD  (Delta )

    Programming & Practical

09

VFD  ( LS)

   Programming & Practical

10

VFD (Mitsubishi)

            Programming & Practical

11

VFD (Yaskawa)

           Programming & Practical

12

VFD (ENC)

           Programming & Practical

Please enter this link to make other courses-https://siatbd.com/

Leave a Reply